MOUNTAIN
RESEARCH
CENTER

Polytechnic Institute
of Bragança

image01

CIMO

CIMO - Mountain Research Center. See video HERE

FROM NATURE TO PRODUCTS, TOWARDS SUSTAINABILITY.

João Eduardo Ribeiro

Group: Sustainable Processes and Products
Phone: 273303081
E-mail: jribeiro@ipb.pt
ORCID: 0000-0001-6300-148X
Scopus Author ID: 25638652400

Career

  • Since 2023: Coordinator Professor at the School of Technology and Management of the Polytechnic Institute of Bragança (ESTiG-IPB), Portugal
  • 2000 - 2023: Assistant Professor at the School of Technology and Management of the Polytechnic Institute of Bragança (ESTiG-IPB), Portugal
  • 1996 - 2000: Lecturer in the School of Technology and Management of the Polytechnic Institute of Bragança (ESTiG-IPB), Portugal
  • 1995 - 1996: Research assistant at the School of Technology and Management of the Polytechnic Institute of Bragança (ESTiG-IPB), Portugal

Roles

  • Since 2023: Director of the Mechanical Construction Materials Laboratory
  • Since 2019: Coordinator of the Mechanical Technology Department of the School of Technology and Management of the Polytechnic Institute of Bragança (ESTiG-IPB), Portugal
  • 2017 - 2019: Director of the Industrial Engineering Master in the School of Technology and Management of the Polytechnic Institute of Bragança (ESTiG-IPB), Portugal
  • 2017 - 2019: President of the Scientific Committee of the Master in Industrial Engineering in the School of Technology and Management of the Polytechnic Institute of Bragança (ESTiG-IPB), Portugal
  • 2011 - 2015: President of the Scientific Committee of the Master in Industrial Engineering in the School of Technology and Management of the Polytechnic Institute of Bragança (ESTiG-IPB), Portugal
  • 2011 - 2015: President of the Scientific Committee of the Master in Industrial Engineering in the School of Technology and Management of the Polytechnic Institute of Bragança (ESTiG-IPB), Portugal
  • Since 2007: Member of the Portuguese Society of Biomechanics
  • 2000 - 2008: Member of the Scientific Council of the School of Technology and Management of the Polytechnic Institute of Bragança (ESTiG-IPB), Portugal
  • 2000 - 2002: Coordinator of the Mechanical Technology Department of the School of Technology and Management of the Polytechnic Institute of Bragança (ESTiG-IPB), Portugal
  • Since 2000: Member of the Portuguese Association of Theoretical, Applied and Computational Mechanics
  • 1997 - 2008: Director of the Computer Assisted Manufacturing Laboratory

Qualifications

  • 2006 - PhD. in Mechanical Engineering, Faculty of Engineering of University of Porto (FEUP), Portugal
  • 1998 - MSc. in Mechanical Engineering, Faculty of Engineering of University of Porto (FEUP), Portugal
  • 1995 - Graduation in Mechanical Engineering, Faculty of Engineering of University of Porto (FEUP), Portugal

Interests

  • Composite materials with natural fibres
  • Mechanical properties of materials, especially biological materials
  • Manufacturing processes and their optimization
  • Metrology
  • Additive manufacturing

Projects:

NaturFAB - Fomento da especialização inteligente, transição industrial e empreendedorismo através de novos materiais com base nos recursos endógenos compatíveis com tecnologías de fabricação aditiva em grande formato
Funding body: POCTEP 2021-2027 - Programa de Cooperação Transfronteiriça Portugal – Espanha
Reference: 0049_NATUR_FAB_2_E
Principal Investigator:João Eduardo Pinto Castro Ribeiro
Start: 2023-10-01
End: 2026-12-31
- Próxima geração de modelos in vitro para o estudo da deformabilidade da parede e fluxo sanguíneo em aneurismas
Funding body: FCT - PTDC - Projectos em todos os domínios científicos
Reference: EXPL/EME-EME/0732/2021
Principal Investigator:João Eduardo Pinto Castro Ribeiro
Start: 2022-01-01
End: 2023-06-30
VALLPASS - Vigilância Ativa e inteLigente com suporte Lora para PASSadeiras
Funding body: NORTE 2020 - Programa Operacional Regional do Norte
Reference: NORTE-01-0247-FEDER-113439
Principal Investigator:João Eduardo Pinto Castro Ribeiro
Start: 2021-07-01
End: 2023-06-30
PDMSmasks4ALL - Desenvolvimento de máscaras transparentes, reutilizáveis e recicláveis em PDMS produzidas com tecnologias de última geração para a proteção à COVID-19
Funding body: PORTUGAL 2020 - COMPETE 2020 - Programa Operacional Competitividade e Internacionalização
Principal Investigator:João Eduardo Pinto Castro Ribeiro
Start: 2020-03-01
End: 2021-05-31
APSEHAL - Automatização de Processos de Soldadura de Estruturas Hiperestáticas em Ligas de Alumínio
Funding body: CENTRO 2020
Reference: CENTRO-01-0247-FEDER-009703
Principal Investigator:João Eduardo Pinto Castro Ribeiro
Start: 2016-04-01
End: 2018-04-01
- Avaliação Clínica e Biomecânica de Implantes Dentários Sujeitos a Platform Switching
Funding body: FCT - PTDC - Projectos em todos os domínios científicos
Reference: PTDC/NA-BEB/108658/2008
Principal Investigator:João Eduardo Pinto Castro Ribeiro
Start: 2010-02-15
End: 2013-02-15

Total results: 86
1
Ribeiro J.,Rodríguez-Martín M.,Barreiro J.,Fernández-Abia A.,García-Martín R.,Rocha J.,Martínez-Pellitero S.
New trends of additive manufacturing using materials based-on natural fibers and minerals : A systematic review
Heliyon, 11, , 2025

2
Souza A.,Lopes D.,Souza S.,Ribeiro J.,Lima R.A.,Ferrera C.
Experimental and numerical analyses of the hemodynamics impact on real intracranial aneurysms: A particle tracking approach
Results in Engineering, 24, , 2024

3
Nobrega G.,Santos Afonso I.,Cardoso B.,Rodrigues de Souza R.,Moita A.,Eduardo Ribeiro J.,Lima R.A.
Exploring heat exchange in space: Recent advances in two-phase fluid experiments in microgravity
Thermal Science and Engineering Progress, 56, , 2024

4
Ariati R.,Souza A.,Souza M.,Zille A.,Soares D.,Lima R.,Ribeiro J.
Mechanical and optical properties assessment of an innovative PDMS/beeswax composite for a wide range of applications
Journal of the Mechanical Behavior of Biomedical Materials, 160, , 2024

5
Souza A.,Nobrega G.,Neves L.B.,Barbosa F.,Ribeiro J.,Ferrera C.,Lima R.A.
Recent Advances of PDMS In Vitro Biomodels for Flow Visualizations and Measurements: From Macro to Nanoscale Applications
Micromachines, 15, , 2024

6
Nobrega G.,Souza R.,Cardoso B.,Afonso I.,Pereira J.,Cardoso E.,Moita A.,Ribeiro J.,Lima R.
Experimental evaluation of green nanofluids in heat exchanger made oF PDMS
Thermal Science and Engineering Progress, 55, , 2024

7
Afonso I.S.,Cardoso B.,Nobrega G.,Minas G.,Ribeiro J.E.,Lima R.A.
Green synthesis of nanoparticles from olive oil waste for environmental and health applications: A review
Journal of Environmental Chemical Engineering, 12, , 2024

8
Rodríguez-Martín M.,Domingo R.,Ribeiro J.
Mapping and prospective of additive manufacturing in the context of Industry 4.0 and 5.0
Rapid Prototyping Journal, 30, 1393-1410, 2024

9
Ferreira M.,Carvalho V.,Ribeiro J.,Lima R.A.,Teixeira S.,Pinho D.
Advances in Microfluidic Systems and Numerical Modeling in Biomedical Applications: A Review
Micromachines, 15, , 2024

10
Neves L.B.,Afonso I.S.,Nobrega G.,Barbosa L.G.,Lima R.A.,Ribeiro J.E.
A Review of Methods to Modify the PDMS Surface Wettability and Their Applications
Micromachines, 15, , 2024

11
Ribeiro J.E.,Rocha J.
Analysis of the Displacement Field Along a Surface Crack with Moiré Interferometry
Advanced Structured Materials, 212, 163-173, 2024

12
Ribeiro J.E.,Rocha J.
Experimental and Numerical Determination of Strain and Displacement Fields on Brazilian Disk
Advanced Structured Materials, 212, 153-162, 2024

13
Nobrega G.,Cardoso B.,Barbosa F.,Pinho D.,Abreu C.,Souza R.,Moita A.,Ribeiro J.,Lima R.A.
EXPERIMENTAL INVESTIGATION OF GREEN NANOFLUIDS: ASSESSMENT OF WETTABILITY, VISCOSITY AND THERMAL CONDUCTIVITY
Proceedings of ASME 2024 7th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2024, , 2024

14
Barros P.M.,Silva F.,Ribeiro J.E.
Production of Videos by Students as a Way of Learning: An Experience in Higher Education Engineering Courses
Lecture Notes in Educational Technology, Part F3283, 1009-1017, 2024

15
Borges L.D.,Rocha A.,Ferreira E.,Ribeiro J.
Planetary Gear Train for Dragster Robot
Lecture Notes in Educational Technology, Part F3283, 544-553, 2024

16
Gonçalves E.S.,Gonçalves J.A.,Rosse H.,Costa J.,Jorge L.,Coelho J.P.,Ribeiro J.E.
Static analysis of a lamppost according to Eurocode EN-40
Procedia Structural Integrity, 54, 83-90, 2024

17
Gonçalves E.S.,Gonçalves J.A.,Rosse H.,Costa J.,Jorge L.,Coelho J.P.,Ribeiro J.E.
Thermal analysis for testing underground battery location
Procedia Structural Integrity, 54, 91-98, 2024

18
Sales F.C.,Souza A.,Oliveira F.R.S.,Lima R.A.,Ribeiro J.
Stress Concentration on PDMS: An evaluation of three numerical constitutive models using digital image correlation
Journal of the Mechanical Behavior of Biomedical Materials, 148, , 2023

19
Barbosa C.,Azevedo H.,Costa S.,Ribeiro J.,Carlos J.,Costa T.,Rocha O.
Solidification and Heat-treatment Conditions Affecting the Tensile Properties and Fracture Feature of an Automotive AlSiMg Alloy
Silicon, 15, 4931-4942, 2023

20
Ribeiro J.,Bueno G.,Martín M.R.,Rocha J.
Experimental Study on Mechanical Properties of Hemp Fibers Influenced by Various Parameters
Sustainability (Switzerland), 15, , 2023

21
Afonso I.S.,Nobrega G.,Lima R.,Gomes J.R.,Ribeiro J.E.
Conventional and Recent Advances of Vegetable Oils as Metalworking Fluids (MWFs): A Review
Lubricants, 11, , 2023

22
Habbar G.,Hocine A.,Maizia A.,Bezazi A.,Ribeiro J.,Houcine Dhaou M.,Bouledroua O.
Failure analysis of biocomposite sandwich pipe under internal pressure – Application for high pressure gas transportation pipelines MEDGAZ
International Journal of Pressure Vessels and Piping, 202, , 2023

23
Rodríguez-Martin M.,Domingo R.,Ribeiro J.
Prospective in additive manufacturing based on r-meta-analysis and bibliometric study
Advances in Science and Technology, 132 AST, 363-372, 2023

24
Afonso I.S.,Duarte C.,Ribeiro A.,Amaral J.S.,Ribeiro J.
Didactic Analysis of Olive Mill Wastewaters Antimicrobial Activity
Lecture Notes in Educational Technology, 457-465, 2023

25
Paulo A.,Santos J.,da Rocha J.,Lima R.,Ribeiro J.
Mechanical Properties of PLA Specimens Obtained by Additive Manufacturing Process Reinforced with Flax Fibers
Journal of Composites Science, 7, , 2023

26
Aguirar J.,Rocha J.,Queijo L.,Ribeiro J.E.
Coir and Hop Fibres: Tensile Characterization and Comparison Between Fibres from Distinct Climates
Advanced Structured Materials, 168, 17-27, 2023

27
Oliveira C.,Rocha J.,Ribeiro J.E.
Mechanical and Physical Characterization of Parts Manufactured by 3D Printing
Advanced Structured Materials, 168, 77-88, 2023

28
Souza A.,Souza M.S.,Ferrera C.,Puga H.,Lima R.,Ribeiro J.
Flow Visualizations in a PDMS Cerebral Aneurysm Biomodel
Lecture Notes in Mechanical Engineering, 209-215, 2023

29
Sales F.C.P.,de Moura P.A.,da Costa R.R.C.,Ribeiro J.E.
Manufacture of bone fracture plates based on glass fiber reinforced polyurethane composite: a gravity casting adapted process
Materials and Manufacturing Processes, 38, 1170-1179, 2023

30
Costa S.,Pereira M.,Ribeiro J.,Soares D.
Texturing Methods of Abrasive Grinding Wheels: A Systematic Review
Materials, 15, , 2022

31
32
Ibañez-Gómez L.F.,Albarracín-Quintero S.,Céspedes-Zuluaga S.,Montes-Páez E.,Ando Junior O.H.,Carmo J.P.,Ribeiro J.E.,Moreira M.M.A.,Siqueira A.A.G.,Guerrero-Martin C.A.
Process Optimization of the Flaring Gas for Field Applications
Energies, 15, , 2022

33
Afonso I.S.,Martín M.R.,Ribeiro J.E.
Effect of Welding Sequence in Angular Distortion on Butt Joint GMAW Process
Applied Sciences (Switzerland), 12, , 2022

34
Maia R.,Carvalho V.,Faria B.,Miranda I.,Catarino S.,Teixeira S.,Lima R.,Minas G.,Ribeiro J.
Diagnosis Methods for COVID-19: A Systematic Review
Micromachines, 13, , 2022

35
Afonso I.S.,Pereira J.,Ribeiro A.E.,Amaral J.S.,Rodrigues N.,Gomes J.R.,Lima R.,Ribeiro J.
Analysis of a Vegetable Oil Performance in a Milling Process by MQL Lubrication
Micromachines, 13, , 2022

36
Habbar G.,Maizia A.,Hocine A.,Ribeiro J.,Dhaou M.H.
Micromechanical Analysis of a Bio-Sandwich Application for Cylinder under Pressure
Journal of Composites Science, 6, , 2022

37
Souza M.S.,Souza A.,Carvalho V.,Teixeira S.,Fernandes C.S.,Lima R.,Ribeiro J.
Fluid Flow and Structural Numerical Analysis of a Cerebral Aneurysm Model
Fluids, 7, , 2022

38
Miranda I.,Souza A.,Sousa P.,Ribeiro J.,Castanheira E.M.S.,Lima R.,Minas G.
Properties and applications of PDMS for biomedical engineering: A review
Journal of Functional Biomaterials, 13, , 2022

39
Ariati R.,Sales F.,Noronha V.,Lima R.,Ribeiro J.
Low-Cost Multifunctional Vacuum Chamber for Manufacturing PDMS Based Composites
Machines, 10, , 2022

40
Nobrega G.,de Souza R.R.,Gonçalves I.M.,Moita A.S.,Ribeiro J.E.,Lima R.A.
Recent Developments on the Thermal Properties, Stability and Applications of Nanofluids in Machining, Solar Energy and Biomedicine
Applied Sciences (Switzerland), 12, , 2022

41
Ariati R.,Sales F.,Souza A.,Lima R.A.,Ribeiro J.
Polydimethylsiloxane composites characterization and its applications: A review
Polymers, 13, , 2021

42
Nobrega G.,Souza M.S.,Rodríguez-Martín M.,Rodríguez-Gonzálvez P.,Ribeiro J.
Parametric optimization of the gmaw welding process in thin thickness of austenitic stainless steel by taguchi method
Applied Sciences (Switzerland), 11, , 2021

43
Garcia L.M.,Noronha V.T.,Ribeiro J.
Effect of welding orientation in angular distortion in multipass gmaw
Journal of Manufacturing and Materials Processing, 5, , 2021

44
Sales F.,Souza A.,Ariati R.,Noronha V.,Giovanetti E.,Lima R.,Ribeiro J.
Composite material of PDMS with interchangeable transmittance: Study of optical, mechanical properties and wettability
Journal of Composites Science, 5, , 2021

45
Carvalho V.,Gonçalves I.M.,Souza A.,Souza M.S.,Bento D.,Ribeiro J.E.,Lima R.,Pinho D.
Manual and automatic image analysis segmentation methods for blood flow studies in microchannels
Micromachines, 12, , 2021

46
Sales F.C.P.,Ariati R.M.,Noronha V.T.,Ribeiro J.E.
Mechanical characterization of PDMS with different mixing ratios
Procedia Structural Integrity, 37, 383-388, 2021

47
Sales F.C.P.,Ariati R.M.,Noronha V.T.,da Costa R.R.C.,Ribeiro J.E.
PU tensile tests: Conventional and digital image correlation analysis
Procedia Structural Integrity, 37, 389-396, 2021

48
Teixeira I.,Castro I.,Carvalho V.,Rodrigues C.,Souza A.,Lima R.,Teixeira S.,Ribeiro J.
Polydimethylsiloxane mechanical properties: A systematic review
AIMS Materials Science, 8, 952-973, 2021

49
Marques E.,Pereira A.,Ribeiro J.
Thermal evaluation of MAG/TIG welding using numerical extension tool
International Journal of Applied Science and Engineering, 18, 1-16, 2021

50
Costa S.,Souza M.S.,César M.B.,Gonçalves J.,Ribeiro J.E.
Experimental and numerical study to minimize the residual stresses in welding of 6082-T6 aluminum alloy
AIMS Materials Science, 8, 271-282, 2021

51
Ribeiro J.,Gonçalves J.,Mineiro N.
Welding process automation of aluminum alloys for the transport industry: An industrial robotics approach
Lecture Notes in Electrical Engineering, 695 LNEE, 72-81, 2021

52
Gonçalves J.,Ribeiro J.,Costa P.
Prototyping and control of a conveyor belt: An educational experiment in mechatronics
Lecture Notes in Electrical Engineering, 695 LNEE, 63-71, 2021

53
54
Hocine A.,Maizia A.,Ghouaoula A.,Ribeiro J.E.P.C.
Deterministic Analysis for Creep Behavior of Damaged Composite Tubular Structure
Journal of Failure Analysis and Prevention, 20, 1858-1863, 2020

55
Souza A.,Souza M.S.,Pinho D.,Agujetas R.,Ferrera C.,Lima R.,Puga H.,Ribeiro J.
3D manufacturing of intracranial aneurysm biomodels for flow visualizations: Low cost fabrication processes
Mechanics Research Communications, 107, , 2020

56
Souza A.,Marques E.,Balsa C.,Ribeiro J.
Characterization of shear strain on PDMS: Numerical and experimental approaches
Applied Sciences (Switzerland), 10, , 2020

57
Carvalho V.,Maia I.,Souza A.,Ribeiro J.,Costa P.,Puga H.,Teixeira S.,Lima R.A.
In vitro biomodels in stenotic arteries to perform blood analogues flow visualizations and measurements: A review
Open Biomedical Engineering Journal, 14, 87-102, 2020

58
Dourado D.M.,Rocha M.L.,Carmo J.P.P.,Farias G.B.,Ribeiro J.E.
Modeling and trade-off analysis of a capacitive silicon Mach-Zehnder modulator for telecom applications
2018 SBFoton International Optics and Photonics Conference, SBFoton IOPC 2018, , 2019

59
Souza A.V.,Ribeiro J.E.,Lima R.
Manufacturing Process of a Brain Aneurysm Biomodel in PDMS Using Rapid Prototyping
Lecture Notes in Computational Vision and Biomechanics, 34, 671-676, 2019

60
Souza A.V.,Ribeiro J.E.,Araújo F.
Numerical Characterization of a Hyperelastic Material to Shear Stress
Lecture Notes in Computational Vision and Biomechanics, 34, 661-670, 2019

61
Ribeiro J.E.,Lopes H.,Martins P.,Braz-César M.
Mechanical analysis of PDMS material using biaxial test
AIMS Materials Science, 6, 97-110, 2019

62
Cardoso C.,Fernandes C.S.,Lima R.,Ribeiro J.
Biomechanical analysis of PDMS channels using different hyperelastic numerical constitutive models
Mechanics Research Communications, 90, 26-33, 2018

63
Lopes A.C.,Fernandes M.G.A.,Ribeiro J.E.P.C.,Fonseca E.M.M.
Determination of optimal parameters in drilling composite materials to minimize the machining temperature using the taguchi method
Biodental Engineering IV - Proceedings of the 4th International Conference on Biodental Engineering, 2016, 135-140, 2018

64
Fernandes M.G.A.,Natal R.,Fonseca E.M.M.,Ribeiro J.E.P.C.,Azevedo L.
Effect of drill speed on bone damage during drilling
Biodental Engineering IV - Proceedings of the 4th International Conference on Biodental Engineering, 2016, 129-134, 2018

65
Ribeiro J.,Fernandes C.S.,Lima R.
Numerical simulation of hyperelastic behaviour in aneurysm models
Lecture Notes in Computational Vision and Biomechanics, 27, 937-944, 2018

66
Ribeiro J.,Lopes H.,Martins P.
A hybrid method to characterise the mechanical behaviour of biological hyper-elastic tissues
Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization, 5, 157-164, 2017

67
Braz-César M.,Ribeiro J.,Lopes H.
Estimation of the dynamic modal parameters of a small-scaled mockup
Procedia Structural Integrity, 5, 347-354, 2017

68
Ribeiro J.E.,César M.B.,Lopes H.
Optimization of machining parameters to improve the surface quality
Procedia Structural Integrity, 5, 355-362, 2017

69
Rocha J.,Ribeiro J.E.,Queijo L.
Comparison of mechanical properties of polyester composites reinforced with autochthonous natural fibres: Flax and hemp
Advanced Structured Materials, 65, 125-134, 2017

70
Ribeiro J.,Lopes H.,Queijo L.,Figueiredo D.
Optimization of cutting parameters to minimize the surface roughness in the end milling process using the Taguchi method
Periodica Polytechnica Mechanical Engineering, 61, 30-35, 2017

71
Dias T.,Paulo N.,Queijo L.,Lopes H.R.,César M.B.,Ribeiro J.E.
Milling parameters optimization for surface quality
Lecture Notes in Electrical Engineering, 402, 583-593, 2017

72
Rodrigues R.O.,Pinho D.,Bento D.,Lima R.,Ribeiro J.
Wall expansion assessment of an intracranial aneurysm model by a 3D Digital Image Correlation System
Measurement: Journal of the International Measurement Confederation, 88, 262-270, 2016

73
Ribeiro J.,Vaz M.,Lopes H.,De Melo F.Q.,Monteiro J.
Assessment of the Displacement Field Along a Surface Crack in a Flat Plate Using Optical Techniques
Experimental Techniques, 39, 10-20, 2015

74
Pinho D.,Bento D.,Ribeiro J.,Lima R.,Vaz M.
An in vitro experimental evaluation of the displacement field in an intracranial aneurysm model
Mechanisms and Machine Science, 24, 261-268, 2015

75
Sampaio C.T.,Fonseca E.M.,Ribeiro J.E.,Cerqueira R.
The assessment of the generated temperature by the drill bit in the bone tissue
Biodental Engineering III - Proceedings of the 3rd International Conference on Biodental Engineering, BIODENTAL 2014, 67-72, 2014

76
Eduardo Ribeiro J.,Lopes H.,Paulo Carmo J.
Characterization of coating processes in Moiré Diffraction Gratings for strain measurements
Optics and Laser Technology, 47, 159-165, 2013

77
78
Lopes H.,Ribeiro J.,Araújo Dos Santos J.V.,Maia N.M.M.
Localization of damage in beams using interferometric techniques
Proceedings of the 6th European Workshop - Structural Health Monitoring 2012, EWSHM 2012, 1, 198-205, 2012

79
Lopes H.,Ribeiro J.,Dos Santos A.J.V.
Interferometric techniques in structural damage identification
Shock and Vibration, 19, 835-844, 2012

80
81
Richter-Trummer V.,Moreira P.M.G.P.,Ribeiro J.,De Castro P.M.S.T.
The contour method for residual stress determination applied to an AA6082-T6 friction stir butt weld
Materials Science Forum, 681, 177-181, 2011

82
Lopes H.,Ribeiro J.E.,Vaz M.,Gomes J.M.
The measurement of the modal strain fields using digital shearography
EPJ Web of Conferences, 6, , 2010

83
Lopes H.,Ribeiro J.E.,Vaz M.A.P.,Silva Gomes J.F.
Unwrapping techniques for speckle phase maps: Study and comparison of the performance of principal methods
EPJ Web of Conferences, 6, , 2010

84
Araújo Dos Santos J.V.,Lopes H.M.R.,Ribeiro J.,Maia N.M.M.,Pires Vaz M.A.
Damage localisation in beams using the ritz method and speckle shear interferometry
Civil-Comp Proceedings, 93, , 2010

85
Ribeiro J.,Monteiro J.,Vaz M.,Lopes H.,Piloto P.
Measurement of residual stresses with optical techniques
Strain, 45, 123-130, 2009

86
Ribeiro J.E.C.,Do Carmo J.P.P.
A wireless acquisition system for monitoring the influence of loads on vertebral column behaviour
BIODEVICES 2008 - Proceedings of the 1st International Conference on Biomedical Electronics and Devices, 2, 233-237, 2008

Useful Links

Contact Us

Centro de Investigação de Montanha
Campus Santa Apolónia / 5300-253 Bragança
Phone: 273 303 382
Email: cimo@ipb.pt

2018 © All Rights Reserved.